Resed: [arm-gnu] [CSL 2005Q3-2 problem report] run-time error

[NAGATA Shoji <nagata.shoji@xxxxxxxxxxxxxxxx>]

Hello,

I wonder if the following report I sent last week was accepted or not.
Please let me know if you need any further information.

Best Regards,
Shoji

NAGATA Shoji wrote: 2006/01/30(Mon) 19:33:51
> Hello,
> 
> I'm using ARM GNU 2005q3-2 build on RH9 and encountered the following
> run-time error. (Using 2005q3-1 as well, the result was the same.)
> 
> In attached sample program, which is comparing data, though it compares
> the same value in the 196th line of C source (sample_r001.c), it becomes
> an error so that the address which should substitute for a register (r1)
> in the 1621st line of an assembler source (sample_r001.s) is incorrect.
> 
> [Compiling an attached file with]:
> arm-none-linux-gnueabi-gcc -ansi -fsigned-char -O3 sample_r001.c func.c -o sample_r001
> 
> [Actual results]:
> ERROR : 256
> 
> If you need any further information, please let me know.
> Thanks in advance for your help.
> 
> Best Regards,
> Shoji
> 
>    /---------------------------------------------------------------------------//
>   / NAGATA Shoji <nagata.shoji@xxxxxxxxxxxxxxxx>, Development Environment Gr. //
>  / Base System Development Center, Panasonic Mobile Communications Co., Ltd. //
> /===========================================================================//

   /---------------------------------------------------------------------------//
  / NAGATA Shoji <nagata.shoji@xxxxxxxxxxxxxxxx>, Development Environment Gr. //
 / Base System Development Center, Panasonic Mobile Communications Co., Ltd. //
/===========================================================================//